[Tissot] TISSOT watch PR 100 Quartz chronometer T1014511605100 Men’s [regular imported goods]

Brand : Tissot

  • luminous

Product Description

Click Check Price to see availability and current price for [Tissot] TISSOT watch PR 100 Quartz chronometer T1014511605100 Men’s [regular imported goods], and get full data of product.

mens wrist watches branded wrist watch for men unique wrist watches expensive wrist watches best wrist watch for men

How to clean the watch at home?

Brushing off dust from the surface of your hand-made accessory or home “walkers” is just a small fraction of what you can do. But even if you perform a similar procedure with enviable regularity, this will not be enough. Over time, you will have to allocate time and thoroughly clean the watch at home, or to be more precise – individual parts of the subject, for example, a dial. The following parts of the mechanism require constant care:

Cleaning will take place in three stages – we will deal with each of them in more detail.

Stage 1. Mechanism:

  • Open the case and carefully remove the mechanism. To do this, you need to disconnect the screw that holds the mechanism in the case.
  • If the dirt is large and visible to the naked eye, you can use a clean toothpick. Use it to remove dirt in easily accessible places.

Important! Manipulation should be carried out with extreme care so as not to break the tip of the toothpick. If it gets stuck inside – this can cause you new problems with getting the torn part out and a new question – how to repair a mechanical watch at home, due to the fact that this very toothpick damaged important structural elements.

  • Use compressed air to clean the entire mechanism. Only apply slight pressure so as not to damage the delicate joints of all watch parts.
  • Carry out the same procedure with the case. In this case, you can increase the air pressure for better cleaning.
  • Take a thin brush and moisten it in pure gasoline or alcohol. Handle all the details of your mechanical watch with gentle smooth movements.
  • Wipe with a cloth or napkin if there is a rough leak on the parts.
  • Let the whole mechanism dry completely.

Stage 2. Case:

  • Alcohol and gasoline will very well remove everything greasy and unnecessary from your watch. Moisten a cloth or cotton pad, swab and wipe the case.
  • The corrosive dirt is cleaned inside and out with a brush dipped in one of these solutions. You can use a toothbrush.
  • After carrying out these procedures, wipe all surfaces dry with a cloth.

Stage 3. Strap:

  • Take a toothbrush with medium soft bristles to clean the strap from hard materials, and with soap or toothpaste clean all dirt.
  • If the dirt is corrosive, then you need a brush moistened with gasoline or alcohol to clean the watch at home.
  • For a strap with gold or silver dusting, use a cloth or swab instead of a brush.
  • If the strap is made of leather or a substitute, then the swab moistened with a special solution for cleaning such a material will help remove dirt. Just wipe the strap carefully on both sides. For small contaminants, you can use the express solution – arm yourself with a damp antiseptic cloth and thoroughly wipe all the material.
  • Wipe with a dry cloth and dry in a warm, ventilated area.

Important! In case your watch has a leather strap, do not use alcohol or gasoline. When using toxic materials, the skin will be damaged and lose its original appearance.

Main recommendations to choose men’s watches

  • Watch’s tyles

The choice of men’s watches is a scrupulous affair, which suggests first thinking over what exactly a useful accessory is for. If you like the classic, then it is better to dwell on analog devices or smart watches with a traditional design. For fans of an active lifestyle and lovers of newfangled gadgets, both digital products and all non-traditional varieties of the accessory are suitable.

  • Watch’s durability

Durability of the device depends on the product brand. Therefore, choosing an accessory, you need to focus on the prestige of the company, recognition, annual turnover and the life of the gadget.

  • Well known brands

It is not easy to choose a men’s watch with so many brands, but it is also known that each brand has its own characteristics, both in design and in the filling of devices. Therefore, it makes sense to trust companies that have already earned the trust of users.

  • Choice of housing

The material from which the watch is made affects not only the appearance, but also its endurance, i.e. the duration of the wear of the products.

  • Watch’s strap selection

How the watch will look on your hand and whether it will be comfortable to wear depends on the width and length of the strap. A fixture that is well-adjusted in length will not allow the appliance to hang or press.

In addition to the usual straps, the watch can be attached with metal bracelets. In this case, so that the product fits perfectly, you can remove the extra links, or vice versa, add. In order for the strap to become a successful addition to the watch, you need to know the size of the wrist and decide what style the product should be in.

There are three main types of mechanisms for watches: mechanical, electromechanical (quartz) and electronic.

Mechanical watches. The mechanism of such a watch drives a tightly wound spring. The spring drives the pendulum, which at regular intervals act on the wheel clockwork. With this mechanism, the arrows on the dial begin to move. In mechanical watches, only arrows are used for counting time. The mechanical watch must be wound up periodically in order to tighten the untwisted spring. A feature of mechanical watches is the uneven speed of unwinding of the spring. Due to this feature, the watch may be in a hurry or late. For mechanical watches there is an acceptable scale of accuracy accuracy. Officially, it ranges from +40 to -20 seconds per day. In order to reduce this error, manufacturers supply their models with an additional automatic winding function. This mechanism allows you to automatically tighten the springs when the clock is oscillating. The automatic winding mechanism is useless with sedentary work. The disadvantage of this function is the fact that in order to implement the automatic winding mechanism, it is necessary to make the watch more massive and heavy. Repair of the automatic winding mechanism is very complicated and will cost the owner of such watches a decent amount. The cost of a mechanical watch is usually higher than that of a quartz watch, since mechanical watches require fine manual tuning during assembly. While most of the manufacturing of parts and the assembly of the quartz watch mechanism is entrusted to automation. that to implement the automatic winding mechanism, it is necessary to make the watch more massive and heavy. Repair of the automatic winding mechanism is very complicated and will cost the owner of such watches a decent amount. The cost of a mechanical watch is usually higher than that of a quartz watch, since mechanical watches require fine manual tuning during assembly. While most of the manufacturing of parts and the assembly of the quartz watch mechanism is entrusted to automation. that to implement the automatic winding mechanism, it is necessary to make the watch more massive and heavy. Repair of the automatic winding mechanism is very complicated and will cost the owner of such watches a decent amount. The cost of a mechanical watch is usually higher than that of a quartz watch, since mechanical watches require fine manual tuning during assembly. While most of the manufacturing of parts and the assembly of the quartz watch mechanism is entrusted to automation.

Quartz (electronic) watches. Powered by battery. Instead of a pendulum, a quartz crystal is used. An electronic generator based on a quartz crystal delivers stable pulses to a stepper motor, which drives the wheel mechanism of the watch. He, in turn, moves the hands on the dial. Various models of quartz watches can have both a clock mechanism for visual display of time and a digital display. Compared to mechanical watches, quartz watches have higher accuracy. The official margin of error for quartz watches is from +20 to -20 seconds per month. Such watches do not need winding. Only occasionally change the battery. If for you the most important thing in a watch is the accuracy of its movement, then it is better to choose a quartz watch.

Digital Watch. An electronic watch is a quartz watch with a digital display. In them, the pulses of the generator are converted into signals that are displayed on the clock display as seconds and minutes changing on the dial. A hybrid option is also possible, when along with a digital display, time is indicated by arrows. If the electronic clock is in a hurry or behind, you can correct the readings by installing new ones, but the oscillations of the generator will remain the same, only in some models the correction of the readings entails a change in the oscillation frequency.